• CAR SAFETY
  • FEEDTIME
  • GIFTS & PLAYTIME
  • HYGIENE
  • MOTHER & BABY
  • NURSERY
  • PRAMS
  • SPECIALS
  • Uncategorized
  • Agile Twin Capsule Adapters

    $49.99

    Afterpay available between $50.00 - $1,000.00 Learn More

    2 in stock

    Britax Carseat Adapters for Steelcraft Agile Twin & Steelcraft Capsule
    Agile Twin Capsule Adapters

    Britax Car seat Receivers for Steelcraft Agile Twin & Steelcraft Capsule.
    The Agile Twin Capsule Adapters are designed to fit the Agile Twin Stroller
    Transforms the Agile Twin Stroller to fit compatible Steelcraft Infant Carriers
    The Adapters are designed to connect the compatible Steelcraft Infant Carrier with the Agile Twin Stroller
    The Interlocking parts provide a quick, secure and safer attachment between an Infant Carrier and Stroller

    SUITABILITY:
    Steelcraft Agile Twin Travel System Stroller

    ATTACHING THE STEELCRAFT INFANT CARRIER

    PLEASE NOTE: BEFORE INSTALLING THE STEELCRAFT INFANT CARRIER ON THE STROLLER, THE TRAY (SUPPLIED) OR ARMBAR (SOLD SEPARATELY) MUST BE REMOVED.
    THE RECEIVERS CAN ONLY BE ATTACHED ON THE LEFT HAND SIDE OF THE STROLLER AS SHOWN IN THE PICTURE. FIT RECEIVERS WHEN STANDING IN FRONT OF THE STROLLER.
    CAR SEAT RECEIVERS ARE MARKED LEFT AND RIGHT FOR CORRECT FITTING

    A:   Stand in front of the stroller and pull the fabric back from the sides of the stroller to expose the stroller hinge.
    Take one car seat receiver at a time and insert the receiver into the stroller hinge as shown.
    Push on the receiver until you hear a ‘click’ which indicates the receiver has locked in.
    Pull up on each receiver to check they have fully locked in.

    B:   Face the feet end of the Infant Carrier towards the stroller backrest.     
    With the Infant Carrier handle in the upright position, locate the Infant Carrier handle mouldings over the receivers on either side.
    Notice the indicator is GREEN.

    C:   Lower the Infant Carrier into the receivers. Press down firmly on both sides.

    D:   The Infant Carrier now needs to be locked securely into the receivers.    
    Squeeze in and hold the latches on either side of the handle, rotate the handle backwards.
    The GREEN indicator will now turn to RED.

    E:   Release the handle latches.
    Then with one hand holding the front of the Infant Carrier, push the Infant Carrier handle all the way down until you hear it lock into the receivers.
    The handle indicator should now be GREEN and the Infant Carrier should be locked into the receivers.
    If the indicator is RED the Infant Carrier handle is not in the locked position,
    repeat step D.
         
    IMPORTANT:
    Ensure that the Infant Carrier is locked into place by pulling up on both sides.
    Do not use the Infant Carrier if it is not correctly installed.

     

    https://www.peelmaternity.com.au/

    BandanaBib – the quick-drying bib
    DryBib the quick-drying bib
    JollyPop Newborn Pacifier